3-960-VT

ESD TOOL KIT TECHNICLINE VARIO 6 PCS (INCL. ESD TOOL HOLDER)
Content: see parts list
Full Flush (without side face, cut completely flush)
side cutters cutting capacity soft/medium/hard/piano ? in mm: 1.0/0.8/0/0
end cutters cutting capacity soft/medium/hard/piano ? in mm: 0.8/0.6/0/0
head width approx.10 mm, blade length 8 mm
material ball bearing steel (HRC 63-65), selected models available as hard metal side cutter (HRC 81) for hard wires on request
surface without reflection matt polished
dissipative between 10^6 and 10^9 ohm
measures 150 x 190 x 80 mm
weight 750 g

TECHNICAL DESCRIPTION
CARE NOTE: High humidity or touching the pliers head with your fingers (sweat) causes rusting. Therefore, the pliers should always be kept dry or protect with oil for storage. If there is any rust on the pliers head, it can be easily removed, with a slight polish. Our ESD tools comply with the following ESD standards DIN EN 61340-5-1, VDE 0300-5-1:2017-07, DIN EN 61340-2-1, VDE 0300-2-1:2016-07, DIN EN 61340-4-6, VDE 0300-4-6:2016-04. We achieve a discharge resistance of 10^6 to 10^9 ohm with the pliers handles, the tweezers and the tool holder. Attention, the use of hand tools alone is not enough to avoid electrostatic charge. For general safety, please use our wrist grounding and ESD mats, for further information see the section workplace equipment. The TECHNICline pliers series is made of high-quality ball bearing steel with exceptional cutting performance for extremely high requirements and demands. The pliers are scratch-resistant, matt-polished, reflection-free and glare-free for optimal work under the magnifying glass or the microscope. The exact symmetrical, induction-hardened cutting edges have a hardness of 63-65 HRC and thus achieve particularly high cutting values. These stable cutting edges are suitable for a wide variety of hard wires. If required, HRC 81 is also available as a hard metal cutter made of tungsten carbide steel, only for selected models - on request). The screwed precision joint with hardened nut (made of alloy steel) ensures perfect joint adjustment and durability even with high cutting loads. Ergonomically shaped, dissipative 2-component hand covers offer a pleasant feel and optimal relief of the hand muscles thanks to the stainless steel double leaf spring.

CONTENT
ESD tool kit TECHNICline VARIO consists of:

5-090-0 ESD tool holder VARIO 8 slots
3-963-15 ESD side cutters TECHNICline full flush 120 mm
3-981-15 ESD end cutters TECHNICline full flush 135 mm
3-992-15 ESD flat nose pliers TECHNICline not serrated jaws 130 mm
3-996-15 ESD snipe nose pliers TECHNICline not serrated jaws 140 mm
5-078-13 ESD SMD universal tweezers 130 mm form PSF stainless steel dissipative

5-055-13 ESD SMD tweezers 120 mm form 7a stainless steel angle 40° dissipative