9-205-ESD-SET1

ESD BALL JOINT VICE (CLAMPING) DISSIPATIVE + EARTH BONDING POINT + CABLE

• Precision ball joint rotatable 360°, steplessly lockable quick release, Quality product Made in Germany
• for clamping to the workbench (table thickness max 80mm)
• 50 mm ESD plastic jaws with grip
• clamping width 70 mm, clamping depth 38 mm, clamping pressure 1470 N
• inclination angle +/- 45°
• spare parts: jaws , article 9-900-E50-ESD (pair)
• cast aluminum with black ESD powder coating, dissipative 10^7 to 10^8 ohm
• Dimensions approx. 310 x 170 x 75 mm
• weight 1550 g

• Maximum torque: ball ? 40 mm approx. 24 Nm, ball ? 60 mm approx. 100 Nm clamp-base: table top thickness max. 80 mm ESD versions dissipative 10^7 and 10^8 ohm EPA suitable for electrostatically protected areas (ESD workplace / ESD protection zone). The foot sections can be connected to the grounding point with a 10 mm push button. Cast aluminum parts powder coated Steel parts chrome-plated, rust-free With the adjusting screw on the lower seat of the ball, the movement of the ball can be adjusted from loose to very firm. For safety-relevant parts, please note that we cannot give a guarantee of the holding forces without knowing your specific application. The ball may behave differently under different physical conditions than it does in our test laboratory in an optimal test environment.

  ---

  GENERAL INFORMATION

  The BERNSTEIN ball-and-socket vice has a continuously adjustable joint head that can be rotated 360° and tilted +/- 45°. The upper part of the vice can be tilted in any direction, and enables work in front of or above the table. With a simple lever movement, the vice head is loosened in the tapered socket, individually aligned and clamped again. Without any locking the ball clamp offers an extremely strong hold. Our product development department is constantly working on the optimization and further development of our products. If you have any questions, improvements or suggestions, we look forward to hearing from you.

  ---

  CONTENT

  ESD handling set consists of:

  • 9-205 ESD ball joint vice SPANNFIX for clamping, dissipative
  • 9-359-2 ESD earth bonding plug 2x10 mm and M5 socket
  • 9-343-1 ESD grounding cable 1 MOhm, 1800 mm 2 press-studs 10/10 mm
•